stained glass art bringing to light the raven watcher - hueforge art
2nd model this evening.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.95x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #042f56 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 #545454 PLA Bambu Labs Basic Dark Gray (10105) Transmission Distance: 1.4 #9d2235 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 6 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue (11602) At layer #12 (1.04mm) swap to Dark Gray (10105) At layer #14 (1.2mm) swap to Maroon Red (10205) At layer #17 (1.44mm) swap to Orange (10300) At layer #21 (1.76mm) swap to White for the rest.






















