Fantasy depiction of Sir Samurai Toad - Dressed for war
A few art pieces this evening.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #042f56 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 #3f8e43 PLA Bambu Labs Basic Mistletoe Green (10502) Transmission Distance: 5 #847d48 PLA Bambu Labs Basic Bronze (10801) Transmission Distance: 0.5 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Dark Blue (11602) At layer #13 (1.12mm) swap to Mistletoe Green (10502) At layer #16 (1.36mm) swap to Bronze (10801) At layer #20 (1.68mm) swap to White for the rest.






















