💙 External Catheter Keychain / Badge Charm – STL File - No AMS - Commercial License Included 💙

A small symbol of awareness, support, and everyday normalcy. This decorative External Catheter Badge Charm is designed as a thoughtful, non-functional accessory for keychains, lanyards, or badge reels. It’s a subtle way to show awareness, spark conversation, or add a personal touch - without serving a medical or functional purpose.

Perfect for doctors, nurses, caregivers, and other healthcare professionals, this charm makes a meaningful addition to badges or keys, helping promote understanding and compassionate conversation in clinical and care settings.

-✨ Fast, easy print – NO AMS NEEDED -✨ Single-color friendly for quick, clean results -✨ Lightweight, compact design -✨ Perfect for keychains or badges -✨ Commercial license included – no subscription

Licensing: Want to sell your creations? You’re covered! This STL file bundle comes with a life-time commercial license, so you can print and sell with confidence.

Why You’ll Love It:

• NO AMS REQUIRED: Print each piece in your favorite colors without needing an AMS system! Fully assembled model also included for use with AMS if desired.
• Commercial License Included: Sell your prints and share the joy! Your purchase includes a commercial license, allowing you to profit from your creations.
• Easy Print and Assembly: Prints quickly and the parts fit together snugly. A touch of glue is recommended for permanent adhesion.

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Designed with simplicity in mind, this STL prints cleanly and quickly, making it ideal for personal use, gifts, or small-shop offerings.

Decorative. Meaningful. Easy to print. Download the STL and start printing today.

Dimensions at 100% Size Assembled: Height: Approx 3.28” (Including tube) Width: Approx 0.58" Depth: Approx 0.55"

PLEASE NOTE: Print tolerances may vary by printer. The settings used in this print were using a 0.4 nozzle printed at 0.2 mm Draft settings. Filament used was PLA and transparent PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Nozzle – 0.4 or smaller
• Supports – YES
• Support Type –TREE SLIM
• Threshold Angle - 30 degrees
• On Build Plate Only - YES
• Remove Small Overhangs - NO
• Top Z-Distance - 0.28 -Bottom Z-Distance – 0.28
• Layer Height: 0.2 or smaller
• Wall Loops – 2
• Infill – 15%

Print Times if separate colors with settings above: One complete catheter only takes about 22 minutes to print with 3 separate colors at standard speed with the settings above.