Pen and Ink design of a Geisha - Hueforge Wallart
A couple art pieces this evening.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 114.79x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.91966mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #847d48 PLA Bambu Labs Basic Bronze (10801) Transmission Distance: 0.5 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Bronze (10801) At layer #13 (1.12mm) swap to Cyan (10603) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.






















