Personal use only unless you hold an active Thangs or Patreon Tier 2 or Tier 2 Plus commercial license. Digital resale or file sharing is strictly prohibited. You may sell only physical prints while your license remains active.

Welcome the Gothic Tissue Box!

Wanted to make my own version of a tissue box, but with some improvements (will work on more models if you like this one)

Comes with the main box and a sliding plate that goes under the box and slides in perfectly.

Supports: 30º -> Tree Slim -> Supports are a bit tricky to remove in the sliding mechanism so i recommend doing it carefully and setting "Support- Top Z Distance at 0.275"

(Everything comes preset on the .3mf file so you don't need to do anything if you use the .3mf)

Printed at: 0,2 layer height with SUNLU PLA Matte (Link below)

PLA I used here (Affiliate link, it helps me): https://store.sunlu.com/products/over-6kg-bulk-sale-pla-matte-filament-neatly-wound-filament?variant=44162575237402&sca_ref=10154934.E0Wzd41dj6&sca_source=Patreon

Discount code for SUNLU: E0WZD41DJ6