Each has their own vision of the Tree of Life - Set of bookmarks
Last set today.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 63.44x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 1.84mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #fec600 PLA Bambu Labs Basic Sunflower Yellow (10402) Transmission Distance: 4.8 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 5 unique filaments
Swap Instructions: Start with Black (10101) At layer #7 (0.64mm) swap to Red (10200) At layer #11 (0.96mm) swap to Sunflower Yellow (10402) At layer #12 (1.04mm) swap to Cyan (10603) At layer #16 (1.36mm) swap to Jade White (10100) for the rest.
























