Stained Glass Designs used in Bookmarks - Disney Themed
two sets of stained glass bookmarks tonight.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 63.44x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 1.83998mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5e43b7 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 #f5547c PLA Bambu Labs Basic Hot Pink (10204) Transmission Distance: 4.5 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Purple (10700) At layer #12 (1.04mm) swap to Hot Pink (10204) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.
























