A bonus tonight - Charizard

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 199.83x200mm in size

You may print at higher layer heights below the Base Thickness of 0.16mm The Max allowed Thickness is 3.36mm and the Actual Thickness is 1.92mm

#f7d959 PLA Bambu Labs Matte Lemon Yellow (11400) Transmission Distance: 4 #080a0d PLA PolyLite Black Transmission Distance: 0.3 #00b1b7 PLA Bambu Labs Basic Turquoise (10605) Transmission Distance: 1 #ff9016 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #ffffff PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 6 unique filaments

Swap Instructions: Start with Lemon Yellow (11400) At layer #3 (0.32mm) swap to Black At layer #4 (0.4mm) swap to Turquoise (10605) At layer #6 (0.56mm) swap to Pumpkin Orange (10301) At layer #14 (1.2mm) swap to Red (10200) At layer #19 (1.6mm) swap to Ivory White (11100) for the rest.