Christmas with Mario and Friends - Hueforge Fan Art
a little something this evening:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.5x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #ec008c PLA Bambu Labs Basic Magenta (10202) Transmission Distance: 4.6 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #00ae42 PLA Bambu Labs Basic Bambu Green (10501) Transmission Distance: 2 #0056b8 PLA Bambu Labs Basic Cobalt Blue (10604) Transmission Distance: 0.5 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 6 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Magenta (10202) At layer #10 (0.88mm) swap to Red (10200) At layer #12 (1.04mm) swap to Bambu Green (10501) At layer #16 (1.36mm) swap to Cobalt Blue (10604) At layer #18 (1.52mm) swap to White for the rest.






















