Not So XL Max Max... inspired fan art Welcome to the instructions for the XL and Not So XL Max If you’ve printed the XL Grinch you will need the XL Max for the correct sizing. For the Not so XL Grinch it will be the Not So.. XL Max. The difference between the two model is the tolerance of the connectors. So the max model is not as large as the other XL models but of course i wanted him to scale to match the grinch. As with other XL Models it fits together with some connectors, there are only two sizes. The model does require glue but i highly recommend a dry build first as the model will stay together without glue. Ive include large inner space to save filament. it dies require some supports but they are minimal. There are some small parts so please make sure you have good adhesion and clean plate before you begin. Filaments used Bambu Basic Brown, maroon red, silver, white and black Ok let’s build. The body prints in one piece, insert the first large connector into the back to attach the tail. Next assemble the collar, insert the 12 silver domes into to each of the cavities around the collar. Next its two large connecting pieces into the top of the body. the collar then slides over. Next in the head which attaches on to the same connecting pieces. Insert the two small connectors on either side of the body. the base of the ears attach here. The long ear is the right as you look at the model and the short on the left. now insert a small connector in the top of each ear and 2 large connectors in the top of the head. you can now slide on the base of the hat to the head and both ears. then its the last large connector to attach the top off the hat. next assemble the the hat tail and bobble using the last two small connectors and this slides onto the the main hat police. lastly the eyes, these don’t have connectors. start with the white then brown and lastly black, paying attention to the names of the pieces making sure you have the right and the left. these then slide into the front of the face. Congratulations you have completed max.