Fan Art - Pikachu watching the sun - Pokémon Hueforge art
A couple art pieces this evening,
For this model: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #f5547c PLA Bambu Labs Basic Hot Pink (10204) Transmission Distance: 4.5 #f4ee2a PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Hot Pink (10204) At layer #16 (1.36mm) swap to Yellow (10400) At layer #22 (1.84mm) swap to Jade White (10100) for the rest.






















