He’s a very gentle, very tired little chunky creature who has fully accepted being carried by his scruff.

He prints flat on his back, with the keychain or ribbon attaching right where he’s being held. His tail has an articulated loop that lets it wiggle forward and back.

✨ What’s Included Scruffy leopard keychain/bauble 3MF/STL

🛠️ Notes

----Prints flat on his back — very simple and friendly to work with. ----I recommend printing at 75% scale or higher to keep the tail strong and flexible. You can go smaller, but do so at your own risk—print strength will vary based on your filament, and remember that silk filaments are more brittle. ----No supports are usually needed. ----Slow first layers are always helpful, especially if your printer prefers a calmer start. ----Not ideal for small children or anyone at risk of choking, as the tail link is a small moving piece. ---Matte or regular PLA works beautifully, and adaptive layer height can help the little face print with fewer “stair-steps” since he lies on his back.

Recommended Print Settings ----Layer Height: 0.16 ----Infill: 15% ----Supports: Not usually necessary for most flexi-style files, though you may add them if your machine prefers a bit of extra help ----Pro Tip: If the first layers struggle to settle, slowing the initial layers or gently increasing the bed temperature can make a lovely difference ----Filament: Matte or regular PLA recommended ----Tested down to: 80%

Hi there! I'm Mouse and I love art & 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this. :)

If you like this design, please check out my other models: cults3d.com/en/users/StarMouse3D/creations

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me.

To legally obtain permission to sell PHYSICAL prints you may obtain permission to sell every model as an active Patreon supporter through this link: patreon.com/c/StarMouse3D

Please do not share digital files! Thank you. Please be warned that these models are not toys and not recommended to be printed for young children, or anyone at risk of a choking hazard. There are small parts that can be broken off if roughly handled. Print at your own risk!