Bookmark Designs of a Mitsubishi Lancer Evolution VII from 2 Fast 2 Furious
2nd set.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #002914 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2.1 #3f8e43 PLA Bambu Labs Basic Mistletoe Green (10502) Transmission Distance: 5 #becf00 PLA Bambu Labs Basic Bright Green (10503) Transmission Distance: 4 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Green (10500) At layer #14 (1.2mm) swap to Mistletoe Green (10502) At layer #18 (1.52mm) swap to Bright Green (10503) for the rest.
























