The DaveMakes Modular Building Set includes a range of modules that you can use to build everything from customized dollhouses to tabletop gaming architecture and terrain. Access compatible modules here.

Stay tuned for more expansion sets!

This download includes different options for hanging lights. See print and assembly details below and in this video.

These models are scaled at 1:50. Files can be scaled in your slicer to print at whatever scale you need. Simply take 50 and divide by your target scale to get the factor to use in your slicer. For example, if you want to print models at 1:100 scale divide 50 by 100 to get .5. Scale your models in the slicer by a factor of .5

Remember that as you scale the print down, the fit between pieces will become tighter. You can offset this by reducing your flow rate a bit.

Assembly:

This section describes specific consideration for printing the pieces included in this download. You can also view printing and assembly instructions here.

The pieces will hold together on their own, use glue if you need a more permanent assembly.

Wall Lights:

These attachments allow lights to hang from the tops of walls. Print a “Wall Light Attachment” and “Wall Light Hanging Hook” in standard or spiralized mode. Select and print a light shade in spiralized mode.

Grid Lights:

These attachments allow lights to hang anywhere in the room. Select and print a “Suspension Grid”. To attach the grid to the tops of the walls print at least four “Wall Grid Attachments.” For each light print a “Grid Light Hanging Hook”. Print extra “Extension S Hooks” if you want the light to hang lower. All attachments and hooks can be printed in standard or spiralized mode. Select and print a light shade in spiralized mode.