Artistic display of a purple Iris - Set of bookmarks
2nd set tonight:
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5e43b7 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #5 (0.48mm) swap to Purple (10700) At layer #12 (1.04mm) swap to Cyan (10603) At layer #15 (1.28mm) swap to Beige (10201) for the rest.
























