Michael M
BooneCo3d1.6K followers
Follow
BooneCo3d
BooneCo3d
|
Image 1 of 5
Lighthouse in a bulb - twist on reality - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Lighthouse in a bulb - twist on reality - Set of bookmarks 3d model
Lighthouse in a bulb - twist on reality - Set of bookmarks 3d model
Lighthouse in a bulb - twist on reality - Set of bookmarks 3d model
Lighthouse in a bulb - twist on reality - Set of bookmarks 3d model
Lighthouse in a bulb - twist on reality - Set of bookmarks 3d model
Lighthouse in a bulb - twist on reality - Set of bookmarks 3d model

Lighthouse in a bulb - twist on reality - Set of bookmarks

Subscribe for access starting at $10 USD
Get access to this model and 854+ more

5 new sets of bookmarks this week - first up is some lighthouses.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #e4bd68 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Cyan (10603) At layer #14 (1.2mm) swap to Gold (10401) At layer #18 (1.52mm) swap to Jade White (10100) for the rest.


Discussions

Lighthouse in a bulb - twist on reality - Set of bookmarks

6 downloads · 8 months ago in  and 
Michael M
BooneCo3d1.6K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 854+ more