A tribute to the wonderful game of Omori. Here there is... something, hovering in the back of your head for far too long.

It is the smaller model from Something from Omori

🖨️ Print Recommendations

✅ Nozzle: 0.4 mm recommended ✅ Layer height: 0.2mm is fine, but for a better result, use a thinner one ✅ No supports needed ✅ Infill: 15–25% is ideal (increase if printing at larger scale) ✅ Recommended filament: PLA or PLA+ for clean edges and easy post-processing

📌 Personal use only