• Featuring Australian Shepherd, Chihuahua, Dobermann, Rottweiler, Shar Pei ✔
• Contains 5 Base and Cap designs ✔
• Support-free ✔
• Keychain version included ✔
• Printable with AND without AMS ✔

📋 Print Settings Recommendations (for Caps)

• Layer height: 0.2mm
• Line width Default (Quality): 0.33
• Wall generator (Quality): Arachne
• Initial Layer Flow Ratio (Quality): 1.03 (in Develop Mode)

(You may adjust this setting as needed depending on your printer’s calibration!)

• Only one wall on first layer (Quality): ON
• Bottom Surface Pattern (Strength): Concentric
• Slow down for overhangs (Speed): OFF

📋 Print Settings Recommendations (for Bases)

• .20mm Standard @BBL

🎨 Filament Used

• Australian Shepherd: Cotton White, Fossil Grey, Charcoal Black, Sunrise Orange, Pastel Ice (Polyterra PLA)
• Chihuahua: Sunrise Orange, Pastel Peach, Charcoal Black, Forest Green (Polyterra PLA)
• Dobermann: Charcoal Black, Ash Grey, Pastel Peanut, Lava Red (Polyterra PLA)
• Rottweiler: Charcoal Black, Ash Grey, Pastel Peanut, Lavender Purple (Polyterra PLA)
• Shar Pei: Charcoal Black, Pastel Peanut, Wood Brown, Lavender Purple (Polyterra PLA)

🛠️ Hardware Used

• 🖨️ Bambu Lab A1 Mini Combo (with the AMS Lite) and a .4mm nozzle
• ⌨️ Glorious Kailh Switches (Box White)

If you've got any suggestions, feel free to reach us out!