Fanart drawing of Nami of the One Piece Straw hat Pirate Crew - Hueforge art
artistic piece.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.84x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #0a2989 PLA Bambu Labs Basic Blue (10604) Transmission Distance: 5 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #ffffff PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue (10604) At layer #12 (1.04mm) swap to Orange (10300) At layer #15 (1.28mm) swap to Beige (10201) At layer #17 (1.44mm) swap to Ivory White (11100) for the rest.






















