fantasy beings of smoke and flame - Set of bookmarks
4th set.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #5b6579 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Grey (10602) At layer #12 (1.04mm) swap to Red (10200) At layer #16 (1.36mm) swap to Jade White (10100) for the rest.
























