a set of 2 bookmarks this time.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #00b1b7 PLA Bambu Labs Basic Turquoise (10605) Transmission Distance: 1 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Orange (10300) At layer #16 (1.36mm) swap to Turquoise (10605) At layer #20 (1.68mm) swap to Jade White (10100) for the rest.