RC4wd Mojave and Tamiya Hilux "Three C" Custom front end
0 downloads · 7 months ago · This front end has been made to help distinguish your Toyota Hilux from the 50,000 other ones at a t
Order your 3D print
Product Specifications
Units:
Part
rtf206-A5_0-2_bezel-conn
1 @ 69 x 24 x 15 mm
rtf206-03_0-2_bumper
1 @ 177 x 17 x 23 mm
rtf206-01_1-1_main
1 @ 169 x 55 x 17 mm
rtf206-A4_0-2_corner_marker_conn
1 @ 42 x 18 x 10 mm
rtf206-a2_no_aux_grill
1 @ 113 x 30 x 11 mm
rtf206-06_0-2_headlight_lenses
2 @ 20 x 20 x 4 mm
rtf206-A9_0-1_bumper_vent_conn
1 @ 43 x 8 x 2 mm
This front end has been made to help distinguish your Toyota Hilux from the 50,000 other ones at a trail event. This is designed to replace the complete nose of the Mojave and Hilux. Side markers are light pipe operated so if you will not have to add another set of lights if you are going with the 4 lamp version.
Please see the video before purchase as there are some detailed steps to be done to get the looks your truck deserves.
Note that this is a bolt on for the Mojave but not the Tamiya. A little notch has to be cut for the Tamiya. See video.
RC4wd Mojave and Tamiya Hilux "Three C" Custom front end
Order your 3D print
Product Specifications
Units:
Part
rtf206-A5_0-2_bezel-conn
1 @ 69 x 24 x 15 mm
rtf206-03_0-2_bumper
1 @ 177 x 17 x 23 mm
rtf206-01_1-1_main
1 @ 169 x 55 x 17 mm
rtf206-A4_0-2_corner_marker_conn
1 @ 42 x 18 x 10 mm
rtf206-a2_no_aux_grill
1 @ 113 x 30 x 11 mm
rtf206-06_0-2_headlight_lenses
2 @ 20 x 20 x 4 mm
rtf206-A9_0-1_bumper_vent_conn
1 @ 43 x 8 x 2 mm



.jpg&w=3840&q=75)

