In addition to my Light-Up Pumpkin Clickers, I made these Light-Up Ghost Clickers 👻 I designed three styles each with a different face. With the shadow they cast, they almost look like they’re floating:)

Update 6/18/2026: I redesigned the ghost bodies for improved printing. I designed a 'custom' support column for each of them because the support generated by the slicer programs was not working well. Within each ghost is a piece that hangs down from the top and connects to the keyboard switch. The 'hanging' piece requires support when printing. Tree supports tend to fall over and become spaghetti, and normal supports surrounded this piece and where harder to remove. So I designed a support column or 'pillar' underneath this part with a gap of 0.2mm. Note, where you go to print the slicer will see that 0.2mm gap and want to add supports. DO NOT add supports to these ghost pieces. That 0.2mm gap is intentional so that you can remove this new custom column support.

This new 3MF file is titled: Light Up Ghost Clicker Fidgets (6:18:26 update) Print Plate #1 (3 ghost bodies): 1 color, no supports needed (ignore warning to add supports) Print Plate #2 (ghost feet base): 2 colors, tree supports added

Note: These clickers require keyboard switches with a light & battery. You can also use standard keyboard switches that don't light up but...the light up ones are pretty fun 🌟

Here is an Amazon link for the switch with lights (and for switches without lights): https://amzn.to/4hGRLpa

Note: This link is for a keyboard clicker fidget toy that I slightly dissemble to get the light-up switch out of. You can also use non-light up switches and I have included the one that I like in my Amazon link also.

Dimensions of Ghost Clickers: 2 in. x 1 ⅝ in.

3D Printing Instructions: Layer Height 0.2mm 15% Infill Supports needed PLA and PETG works great

I have included a 3mf file with the following print profile: Print Plate #1 (3 ghosts): 1 color, supports added Print Plate # 2 (ghost feet base): 2 colors, supports added

How to Assemble:

• First remove the light up switches from the Keyboard Clicker Fidget Toy from Amazon (if you are using non-light up switches proceed to the next step)
• Insert the switch into the ghost feet base
• Insert the ghost feet base with switch into the body by pushing it firmly into place (the top of the switch with the ‘+’ shape is small and may take a couple tries to line it up and push it into the corresponding hole)

Have fun printing! 👻 Erin