Winnie the Pooh fan art - Friends of Christopher Robin - Hueforge art
Sharing a couple art designs this evening.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used: (* = Owned) #6f5034 * PLA Bambu Labs Basic Cocoa Brown (10802) Transmission Distance: 1.4 #847d48 * PLA Bambu Labs Basic Bronze (10801) Transmission Distance: 0.5 #f7e6de * PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Cocoa Brown (10802) At layer #9 (0.8mm) swap to Bronze (10801) At layer #12 (1.04mm) swap to Beige (10201) At layer #18 (1.52mm) swap to White for the rest.






















