Second set of League of Legends fanart bookmarks.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.24mm The Max allowed Thickness is 2mm and the Actual Thickness is 1.75968mm

Filaments Used: (* = Owned) #000000 * PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #0a2989 * PLA Bambu Labs Basic Blue (10601) Transmission Distance: 4 #5e43b7 * PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 #ffffff * PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #5 (0.48mm) swap to Blue (10601) At layer #8 (0.72mm) swap to Purple (10700) At layer #14 (1.2mm) swap to Jade White (10100) for the rest.