Sometimes metal work for a stuffed teddy bear - Hueforge art
3rd piece of art tonight:
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 155.56x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2281mm
Filaments Used: (* = Owned) #000000 * PLA Bambu Labs Matte Charcoal (11101) Transmission Distance: 1.5 #6f5034 * PLA Bambu Labs Basic Cocoa Brown (10802) Transmission Distance: 1.4 #e4bd68 * PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 #ffffff * PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Charcoal (11101) At layer #7 (0.64mm) swap to Cocoa Brown (10802) At layer #9 (0.8mm) swap to Gold (10401) At layer #11 (0.96mm) swap to Jade White (10100) for the rest.






















