Another piece of art for the world and this next holiday season.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used: (* = Owned) #000000 * PLA Bambu Labs Matte Charcoal (11101) Transmission Distance: 1.5 #6f5034 * PLA Bambu Labs Basic Cocoa Brown (10802) Transmission Distance: 1.4 #f7e6de * PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #ffffff * PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Charcoal (11101) At layer #9 (0.8mm) swap to Cocoa Brown (10802) At layer #13 (1.12mm) swap to Beige (10201)

Border Only Colors from here until the end. At layer #24 (2mm) swap to Jade White (10100) for the rest.