A couple art pieces this evening.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used: (* = Owned) #080a0d PLA PolyLite Black Transmission Distance: 0.3 #5b6579 * PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 #f4ee2a * PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 #ffffff * PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Grey (10602) At layer #13 (1.12mm) swap to Yellow (10400)

Border Only Colors from here until the end. At layer #18 (1.52mm) swap to Jade White (10100) for the rest.