2nd picture of Miku.

For this model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.84x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Magenta (10202) Transmission Distance: 4.6 PLA Bambu Labs Matte Sky Blue (11603) Transmission Distance: 2 PLA Bambu Labs Basic Light Gray (10104) Transmission Distance: 2.8 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Magenta (10202) At layer #17 (1.44mm) swap to Black (10101) At layer #19 (1.6mm) swap to Sky Blue (11603) At layer #24 (2mm) swap to Light Gray (10104) At layer #28 (2.32mm) swap to Magenta (10202) for the rest.