Fan Art of the virtual influencer Hatsune Miko - Hueforge art
A couple new pictures to share.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.84x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used: PLA Bambu Labs Basic Blue (10604) Transmission Distance: 5 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 PLA Bambu Labs Basic Turquoise (10605) Transmission Distance: 1 PLA Bambu Labs Basic Light Gray (10104) Transmission Distance: 2.8 This print uses 5 unique filaments
Swap Instructions: Start with Blue (10604) At layer #9 (0.8mm) swap to Black (10101) At layer #11 (0.96mm) swap to Red (10200) At layer #16 (1.36mm) swap to Black (10101) At layer #19 (1.6mm) swap to Turquoise (10605) At layer #23 (1.92mm) swap to Light Gray (10104) At layer #28 (2.32mm) swap to Red (10200) for the rest.






















