Beauty in front, or inside a picture of stained glass? Set of bookmarks
3rd set.
For this set:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Nardo Gray (11104) Transmission Distance: 1.5 PLA Bambu Labs Basic Pink (10203) Transmission Distance: 8 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Nardo Gray (11104) At layer #12 (1.04mm) swap to Pink (10203) At layer #15 (1.28mm) swap to Beige (10201) for the rest.
























