Classic Pop Art Style car on display - Hueforge wall art
Last piece this evening is that of a unique and fun luxury car set in an alternate world.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 159.44x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 PLA Bambu Labs Basic Turquoise (10605) Transmission Distance: 1 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Red (10200) At layer #15 (1.28mm) swap to Turquoise (10605)
Border Only Colors from here until the end. At layer #18 (1.52mm) swap to Beige (10201) for the rest.






















