A couple art piece I am sharing tonight.

First is this piece of a crow:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 159.44x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Dark Gray (10105) Transmission Distance: 1.4 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Light Gray (10104) Transmission Distance: 2.8 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Dark Gray (10105) At layer #18 (1.52mm) swap to Beige (10201)

Border Only Colors from here until the end. At layer #23 (1.92mm) swap to Light Gray (10104) for the rest.