🎃👻 Halloween Boo Sign – STL Files for 3D Printing 👻🎃 Get ready to add a touch of spooky fun to your Halloween décor with this adorable Boo Sign STL bundle! Featuring a playful pumpkin, a googly-eyed spider, and a bat with outstretched wings, this design is perfect for creating a festive shelf sitter, tabletop accent, or Halloween party decoration. Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence. With this file, you're free to print and sell your finished prints without restriction—ideal for artists, small businesses, and online sellers. Product Features:

• Customizable - use the sign with or without the spider or bat
• STL file format – ready for 3D printing
• No AMS required – print pieces by color, no AMS needed for a beautiful multicolor project
• AMS-ready model included – ready for multi-color printing with AMS for bold, vibrant results
• Commercial license included – buy once, print forever! Sell printed items with no subscription The Halloween Boo Sign makes an excellent décor piece for your home, office, or seasonal shop booth. Whether you’re making one for yourself or producing multiples to sell, this fun and festive design is sure to catch attention. 🎃 Perfect for shelves, mantels, tiered trays, and displays. 🕷 Great seasonal seller for crafters and small businesses. Bring some spooky-cute energy to your holiday lineup with this easy-to-print Halloween project!

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Assembly Note Some pieces are designed as a tight fit between parts. Slight pressure may be required to snap together – eyes and connector parts. Other pieces are meant to be loose fit for easier assembly. Glue is recommended for permanent hold and for smaller pieces. Assembled Dimensions: Height: Approx. 6.17 inches Width: Approx. 10.57 inches Depth: Approx. 1.54 inches Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate. Print quality would be better with smaller layer height or smaller nozzle.
Recommended Print Settings:

• Supports – YES but minimal
• Support Type - TREE SLIM
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – NO – unless you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Infill – 10% or more if you would like stronger lines
• Wall Loops – 2
• Ironing – Optional for top surfaces