Fan Art of the Pokemon - Electric trio Jolteon, Pikachu and Plusle - Bookmarks
New designs sharing tonight - first up are some pocket monsters.
For these models: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.88x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Matte Dark Brown (11801) Transmission Distance: 2 PLA Bambu Labs Basic Blue (10604) Transmission Distance: 5 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 PLA Bambu Labs Matte Lemon Yellow (11400) Transmission Distance: 4 This print uses 4 unique filaments
Swap Instructions: Start with Dark Brown (11801) At layer #13 (1.12mm) swap to Blue (10604) At layer #17 (1.44mm) swap to Maroon Red (10205) At layer #21 (1.76mm) swap to Lemon Yellow (11400) for the rest.
























