Hello,

I present the Church. 🥇Join the community CLICK It consists of separate elements, which allows printing without the use of AMS.

All parts are attached/inserted, allowing assembly (📸visible structural elements are visible in the photo).

🧱The building's walls are covered with boards and printed flat.

🪨The pillar and stairs are printed vertically.

🛖The building's roof had to be printed horizontally due to:

a) the structural elements,

b) the pillar's attachment (because the slab under the house is already large enough),

c) the size of the roof.

The roof is divided into two parts to allow printing on smaller printers (move the roof diagonally in a slicer).

💠To assemble the whole thing, you only need glue.

All elements were created with a margin of printing error, which translates to mounting to the ground.

The roof is removable. If you prefer, you can glue it permanently.

The roof is connected to the pillars with glue.

🕯️You can place an electric candle or LED lights inside for a more dramatic effect in the evening.

You can scale it down to at least 30% smaller.

I haven't tried more, but I think it shouldn't be a problem.

The roof may use a bit of filament but as I said, due to the construction it is unavoidable. All 3DLION models are copyrighted. DO NOT SELL ANY DIGITAL FILES. Sale of printed models through the following license PATREON