Artistic depiction of a Turtle swimming in red and black - Hueforge art
sharing a few more designs like the elephant. These can be changed to any color by exchanging the 3rd color (red) with the color of choice.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x126.22mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Matte Charcoal (11101) Transmission Distance: 1.5 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Charcoal (11101) At layer #7 (0.64mm) swap to Blue Grey (10602) At layer #9 (0.8mm) swap to Red (10200) At layer #13 (1.12mm) swap to Jade White (10100) for the rest.























