Love your WPL C24 Hilux? Us too! We can make it even better!

Rollbar: This is a magnetic rollbar for the WPL C24. Please see the video link for installation and detailing (E406)

Magnet for the rollbar slots Slot is 4.25mm in Diameter by 1.5mm tall

We used: mcmaster.com/5862K402

Thickness 1.0mm / 0.04" OD 4mm / 0.157"

The magnet under the body should be large. 1/4"(6.25mm-ish) Diameter byt 1/8"(3mm-ish)

We used: mcmaster.com/5862K103

Parts will need to be primed and painted. Nothing comes finished.

Bumper: Two versions of the rear bumpers are available (one with light sockets, one without). Please see the video on installation prior to purchase (e212). We used SLS for bumper and bullbar while the lens caps are SLA. Note that the image for the standard rear bumper with no light pods is not shown.

Parts will need to be primed and painted. Nothing comes finished.

**Bullbar: ** This set will allow you to add a front bullbar with faux lamps. Please see the video on installation prior to purchase (e212). The front lenses come in a set of 6 (there was almost no cost change from 2 ot 6) only. If you also buy the rollbar (which takes 4), then you only need the set of 6 for both.

Parts will need to be primed and painted. Nothing comes finished.

Lens Set This set gives you ultra detailed and factory correct rear light lenses as well as the option of installing rear side markers and front bumper turn signals. You will need to bore out the tail light mount holes in the event yours are too tight. this will also require you to cut the bumper and drill the rear marker area to fit them all.

Parts will need to be painted. Nothing comes finished. They will be clear.