ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file. .................................................... For those of you who have been asking for a dog... ok, ok, this is a stretch BUT how stunning did this month's Early release turn out ?!? I have been wanting to do another uber detailed "humanoid" for awhile, and man was this one alot of work.

I think it makes a great little collection with the Mummy and Sarcophagus Out of the Vault Exclusive since Anubis is the protector of graves and guide to the underworld!

It is fully print-in-place and comes with two accessories (a khopesh and ankh) to hold. Just make sure to scale the accessories the same size as your print. And my wife did another amazing paint job on the 125% STL. I personally think it looks better than the AMS, but I am a fan of her work hahaha. That was a tri-color silk with gold rub n buff and some painted details.

Happy Printing -Dan

*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :) Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://thangs.com/designer/flexifactory

Included Files: -3mf project file -Anubis STL Print-in-place -Anubis STL Khopesh -Anubis STL Staff -Colored 3mf project file for cut XL version -XL Anubis Bottom -XL Anubis Top -XL Anubis Right Arm -XL Anubis Left Arm -XL Anubis Staff Top -XL Anubis Staff Bottom -XL Anubis Khopesh

Print tips and Info:

-STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience.

-You must check your material/printer/settings to make sure it works correctly for your printing project.

-I print with, 15% infill/gyroid, .12 or .16 layer height for quality.

-As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.

-I successfully test printed between 70% and 350% for this design. You can go much larger with the cut version. The smaller you go, some detail will be lost.

-XL version is provided in case you want to print a Giant Anubis. It comes in pieces. Scale the pieces up and Print as large as you want in multiple prints. Then glue together with Super Glue. It is easiest to lay the pieces flat on the table while holding glued parts together.

Note: If you are maxing out your build plate, make sure you can get every part up to size before you begin printing.

-I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory