If noise were to be visible, what would it look like? Overwhelming Senses - Hueforge Wall art
4th piece to share: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue (10601) Transmission Distance: 4 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 This print uses 3 unique filaments
Swap Instructions: Start with Black (10101) At layer #7 (0.64mm) swap to Blue (10601) At layer #11 (0.96mm) swap to Red (10200)






















