Hueforge art - Gloom Colors while watching the world - Wall Art
Have a couple piece of art I have been messing with this afternoon.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x114.38mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used: PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Matte Marine Blue (11600) Transmission Distance: 0.5 PLA Bambu Labs Basic Bright Green (10503) Transmission Distance: 4 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Dark Blue (11602) At layer #8 (0.72mm) swap to Marine Blue (11600) At layer #12 (1.04mm) swap to Bright Green (10503) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.






















