Deep in the autumn woods, where fog drifts low and the ground is soft with fallen leaves, roams a fox spirit with wings of burning maple. Her name is whispered as Aurelia, born when the forest’s sorrow mingled with its mist. Her wings rustle with the voices of ancient trees, and when she takes flight, the fog parts as though the season itself is shifting. Travelers say if she leaves a single crimson leaf at your path, the forest has marked you as a friend—but if she passes in silence, beware, for it means the woods remember a wound you have dealt, and Aurelia never forgets.

Thank you for the wonderful extra pictures: Nerdystitcher (Rainbow), Dragon.Nanny (Handpainted), and Sillywabbit (White Tail - Red Leaves)

Tree trunk display not included.

Painted 3MF included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results.

The wings just pop in, and you may need to scale up or down a couple of percent depending upon the filament you use. The matte filament I used shrank more than in my first test with regular PLA.

Printing Recommendations: Initial layer and initial fill: 25 mm/s Layer Height: 0.16 - 0.20 mm Walls: 3 Infill: 15% Supports: None needed — this design prints in place! Cooling: Let the plate cool completely before removing your print to avoid warping or damage. Printer Acceleration: Slow down printer acceleration for smoother results. Printing the outer walls at half speed helps create a nice, clean finish.

Looking for more designs? 🛍️ Browse the full collection in the Rebel Alicorn MMF Store

⚠️ Important – Please Read: All Rebel Alicorn Designs are protected under Copyright Law.

Your purchase grants you the right to download and print the design for personal use only. You do not have permission to: Resell, Remix, Alter, or Redistribute the digital files in any form

No design modifications are allowed. Except for keyring holes and straw holes, other changes must be approved.

Selling physical prints of any Rebel Alicorn design requires authorization. To become an authorized seller, you must join the “Merchant Tier” on Patreon, Thangs, or MMF.