the unique designs of the steampunk butterfly - set of bookmarks
5th set.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Matte Sky Blue (11603) Transmission Distance: 2 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Basic Mistletoe Green (10502) Transmission Distance: 5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 This print uses 5 unique filaments
Swap Instructions: Start with Sky Blue (11603) At layer #4 (0.4mm) swap to Dark Blue (11602) At layer #8 (0.72mm) swap to Mistletoe Green (10502) At layer #13 (1.12mm) swap to Beige (10201) At layer #24 (2mm) swap to Orange (10300) for the rest.
























