Airbrush designs sharing the Asian world - Temples, Trees and Mountains - set of bookmarks
2nd model for this week:
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Matte Dark Green (11501) Transmission Distance: 0.5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Blue (11602) At layer #13 (1.12mm) swap to Dark Green (11501) At layer #18 (1.52mm) swap to Beige (10201) for the rest.
























