Mount for attaching an Anker Prime 200W 6 port charger to a hard surface (with command strips or the like) or the back of a couch (by running 1.5 inch nylon webbing through the hole in the back and sewing it to the back of the couch). Has a lid that snaps in with dovetails to keep the charger from falling out. This works with my printer which has pretty good tolerances but you might have issues with the fit if you have looser tolerances. You could also use some superglue or something to better attach the pieces together.

The parts that stick out of the top of the face are there to hold some Baseus 100W USB-C retractable charging cables, which I'm quite fond of. I've also included a simpler face piece that just has a big ol' hole for whatever cables you're plugging into it.

Requires supports. Feel free to modify the OpenSCAD file to not require supports if you'd like to fix that, but I thought it would look uglier that way. I'll upload your file here if you send it to me.

The OpenSCAD file requires BOSL2 to work. You can learn more about that here: https://github.com/BelfrySCAD/BOSL2?tab=readme-ov-file#installation