Michael M
BooneCo3d1.6K followers
Follow
BooneCo3d
BooneCo3d
|
Image 1 of 5
The watchful eye of the sage dragon - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
The watchful eye of the sage dragon - Set of bookmarks 3d model
The watchful eye of the sage dragon - Set of bookmarks 3d model
The watchful eye of the sage dragon - Set of bookmarks 3d model
The watchful eye of the sage dragon - Set of bookmarks 3d model
The watchful eye of the sage dragon - Set of bookmarks 3d model
The watchful eye of the sage dragon - Set of bookmarks 3d model

The watchful eye of the sage dragon - Set of bookmarks

Subscribe for access starting at $10 USD
Get access to this model and 825+ more

2nd Set for this week.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue (10601) Transmission Distance: 4 PLA Bambu Labs Basic Bambu Green (10501) Transmission Distance: 2 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Blue (10601) At layer #15 (1.28mm) swap to Bambu Green (10501) At layer #21 (1.76mm) swap to Jade White (10100) for the rest.


Discussions

The watchful eye of the sage dragon - Set of bookmarks

11 downloads · 9 months ago in  and 
Michael M
BooneCo3d1.6K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 825+ more

More models