I'm making NSFW HueForge with AI generated art.

It took me a week of creation, test prints and modifications to achieve this result.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Models are 156x228mm and 117x171mm in sizes You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:

• PLA+ eSUN Black Transmission Distance: 0.1
• PLA PolyLite Pro Metallic Blue Transmission Distance: 0.3
• PLA+ eSUN Blue Light Transmission Distance: 4.8
• PLA eSUN Marble Transmission Distance: 4.9
• PLA+ eSUN Red Fire Engine Transmission Distance: 4
• PLA+ eSUN White Bone Transmission Distance: 5.8
• PLA+ eSUN Grey Transmission Distance: 0.3 This print uses 7 unique filaments

Alternatively you can swap Grey by Metallic Blue and have a pretty similar art with 6 colors instead of 7.

Swap Instructions:

• Start with Black
• At layer #5 (0.48mm) swap to Metallic Blue
• At layer #7 (0.64mm) swap to Blue Light
• At layer #11 (0.96mm) swap to Marble
• At layer #14 (1.2mm) swap to Black
• At layer #15 (1.28mm) swap to Red Fire Engine
• At layer #17 (1.44mm) swap to White Bone
• At layer #25 (2.08mm) swap to Marble
• At layer #27 (2.24mm) swap to Black
• At layer #30 (2.48mm) swap to Grey for the rest.

3MF files are Bambu Studio ready