- Follow us on Instagram (sektor7_studios_3d)

A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

- You can also join us on Patreon

HALLOWEEN STRING-ART / 3 DIFFERENT DESIGNS

Hello everyone :)

I have created different versions of "STRING-ART" to match the upcoming Halloween.

The stand can be used for all 3 designs. I hope you like the design.

Both the stand and the Halloween string art are very easy to print and use very little filament.

3 different Designs:

• GHOST
• PUMPKIN
• PUMKIN FACE

The principle behind it:

• The printer pulls threads from one side to the other (so-called bridges)
• With each additional layer, the construction becomes a little more stable, this is because the individual threads support each other
• If you now lay the threads cleverly on top of each other, the result is an image

No supports are required for this print.

Have fun printing!

MORE STRING-ART DESIGNS YOU CAN FIND IN OUR “STRING-ART / STRING ART COLLECTION”: https://than.gs/c/106132

RECOMMENDED PRINT SETTINGS:

• Filament: Bambulab PLA Matte black (used in our make)
• Infill: 10% Gyroid or Grid
• Layer Height: 0.2mm
• Walls: 2
• Nozzle Size: 0.4mm
• Support Structure: none needed!
• Brim: None needed, but when you have adhesion problems than activate the brim

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios

Greetings

Leon from Sektor 7 Studios