Creation of a world from pen and paper - Fantasy Hueforge art
3d piece of art tonight.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Indigo Purple (10701) Transmission Distance: 2 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 PLA Bambu Labs Basic Blue (10604) Transmission Distance: 5 PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 5 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Indigo Purple (10701) At layer #12 (1.04mm) swap to Gold (10401) At layer #16 (1.36mm) swap to Blue (10604) At layer #21 (1.76mm) swap to Ivory White (11100) for the rest.






















