Due to a very nosy cat I needed to put up some sort of barrier preventing the cat from jumping up on the kitchen counter from a nearby side board. I decided to make the barrier a Multiboard wall, so that it can also be used for hanging stuff as well.

The issue - which this 90-Degree Single Snap (DS Part A) Medium Command Strip Mount solves - was that the Multiboard project (at least from what I could find) does not offer a 90-degree Single snap, by which a Multiboard tile can be secured to a countertop, a wall, or the underside of a cabinet.

Presto! I designed this.

I prefer the aesthetics of the old Single Snap Command Strip mounts over the new ones, as they hide the Command Strip from view, and they also make it easier to calculate the required height over surface, which is why I used on of these as the basis for my design.

Unfortunately, one drawback of this design - as opposed to the official Multiboard designs - is that you will need to use support when printing.

Enjoy!